Mounting Philips screen to wall

Created by Teemu Kortelainen, Modified on Fri, 23 Feb 2024 at 02:24 PM by Teemu Kortelainen

Philips attach guidance in every box where screens are delivered and here is the same guidance.
Installations are done by customers, but our support will help if needed.



Step 1 Use a screwdriver to loosen the screw on the left side of the back cover.

Step 2 Use a screwdriver to detach the back cover.

Step 3 Remove the back cover from the signboard.

Step 4 Stick the silicon gaskets (provided) on the back cover (as indicated below)

Step 5  To mount the back cover to the wall, flip over the back cover, the “Philips” logo should face the wall. Use a screwdriver to insert nails (x3) into the holes (indicated below) of back cover, then fix the back cover to the wall.

Step 6 Plug the power cable to the “DC12V” port, then connect the network cable to “LAN” port of the signboard.

Step 7 Insert the signboard carefully into the back cover which is already mounted on the wall.


Screen can be installed in vertical or horizontal. Systam Rooms application can adapt to this automatic.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article